| MODEL |
AD6000 (L) |
AD 10K (L) |
| PHASE |
Single phase with ground |
| CAPACITY* |
6000VA / 4800W |
10000 VA / 8000 W |
| INPUT |
| Nominal Voltage |
208/220/230/240VAC |
| Input Voltage Range |
110-300 VAC (Based on load at 50%) |
| 176-300 VAC (Based on load at 100%) |
| Frequency Range |
46~54 Hz or 56~64 Hz |
| Power Factor |
0.99 @ Nominal Voltage (100% load) |
| OUTPUT |
| Output Voltage |
208/220/230/240VAC |
| Voltage Regulation |
+1% |
| Frequency Range (Synchronized Range) |
46~54 Hz or 56~64 Hz |
| Frequency Range (Batt.Mode) |
50 Hz or 60Hz + 0.1 Hz |
| Current Crest Ratio |
3:1 |
| Harmonic Distortion |
3 % THD (Linear Load) |
| 5 % THD (Non-linear Load) |
| Waveform (Batt.Mode) |
Pure Sine wave |
| EFFICIENCY |
| AC Mode |
92% |
93% |
| Battery Mode |
90% |
91% |
| BATTERY |
| Battery Type |
12 V / 9 Ah |
| Typical Recharge Time |
9 hours recover to 90% capacity |
| Charging Current (max.) |
1 A / 2 A |
| INDICATORS |
| LCD |
Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators |
| ALARM |
| Battery Mode |
Sounding every 4 seconds |
| Low Battery |
Sounding every second |
| Overload |
Sounding twice every second |
| Fault |
Continuously sounding |
| ENVIRONMENT |
| Humidity |
0-95% RH @ 0-50C (non-condensing) |
0-95% RH @ 0-40C (non-condensing) |
| Noise Level |
Less than 55dB @ 1 Meter |
Less than 58dB @ 1 Meter |
| MANAGEMENT |
| Smart RS-232 / USB |
Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8/10, Linux and MAC |
| Optional SNMP |
Power management from SNMP manager and web browser |
